Lifter bore blueprint

[pshyched]

I found a block that is rough cast and needs lifter bores drilled. There is no holes at all there now.The machine shop needs a blueprint. Any ideas where to find one?

[Graham1524]

I would try and contact browell bellhousing, they sell a bowtie block without these holes drilled. May be able to point you in the right direction.

http://www.browellbellhousing.com/blocks_heads.html

[pshyched]

Thanks. It is the browell bellhousing block I was looking at and they didnt have anything. The whole thing turned into quite a project especially finding a steel crank so I decided to stay with a stock block and am going to have the crank Nitrited. Thanks for responding