I found a block that is rough cast and needs lifter bores drilled. There is no holes at all there now.The machine shop needs a blueprint. Any ideas where to find one?
Announcement
Collapse
No announcement yet.
Lifter bore blueprint
Collapse
X
-
I would try and contact browell bellhousing, they sell a bowtie block without these holes drilled. May be able to point you in the right direction.
http://www.browellbellhousing.com/blocks_heads.html
-
Thanks. It is the browell bellhousing block I was looking at and they didnt have anything. The whole thing turned into quite a project especially finding a steel crank so I decided to stay with a stock block and am going to have the crank Nitrited. Thanks for responding
Comment
Comment